Open Care System

CONTROL PANEL
• The Tianan, D 2 open care system comes with automatic and baby (Servo) modes.
• Big separate display for both skin and air temperature.
• Display can be converted from °C to °F by the push of a button.
• A big LCD is provided for more information and visualizations ofthe heater power in manual and servo modes

ALARM
A full panel of alarms provides safety and convenience, with both audible and visual indicators in the event of:
• High Temp./Low Temp.
• Probe Failure
• Power Failure
• System Fail
• Timer on
• Heaterfail / ON (Optional) only visual alarm Provided MANUAL MODE
• The system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%.
• The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit. AIR MODE • The system comes with air sensor. This added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 39°C irrespective of what the skin temperature is at the time of event.

HEATER ASSEMBLY
• The heater assembly located above the centre of the support structure of an integral examination light and a 650 watts heating system.
• Silica/Quartz /Ceramic Heater for quick warming and even distribution of heat on the baby bed.
• The heater can be swivelled in either direction for taking X-ray and doing procedures.

LED PHOTOTHERAPY
• Tianam, D 2 comes with choice of highly efficient and bright choice of LEDs on each side of the heater.
• The strong LUX of 24/30 LEDs cure jaundice in baby rapidly. THE FIRST BREATH
• The open care system combines virtually all the technology a caregiver may need in situation needed for resuscitation. The neonate can be supplied with a constant oxygen flow through the oxygen humidifier when connected to an oxygen cylinder/wall unit.
• The motorized slow suction can be used with a simple flip of a switch.
• A digital Apgar time is standard, which signals when 1, 5 and 10 minutes have elapsed. BABY BED
• The spacious baby bed incorporates easy drop down/fold down glasses for maximum access to the patient.
• Gas spring is fitted which allows easy adjustment angle for Trendelenburg & Reverse Trendelenburg Position.

RESUSCITATOR
• It is mainly used in delivery room, baby wards & NICU. The baby's maximum weight should be up to 10KG.
• Adjust the Oxygen concentration from 21%to 100% The range of flow adjustment is 5LPM-15LPM.
• The MAX-P and PIP are safe, controlled and accurate. The PEEP is constant and accurate.
• Simple operation and flexible application TECHNICAL SPECIFICATION OPTIONAL
• Height-1850mm • X-Rayfacility is provided below the baby bed.
• Length-105Ornm
• Inbuilt printer fitted in the unit gives you real time • Width-650mm printout of the event when required. ELECTRICAL SPECIFICATION
• Count Up/down Timer.
• Heater Power-650 Watts
• Check baby Alarm.
• Fuse-5 Amp
• Pre-Warming mode
• Power supply-200V/50Htz

Our range of PianaTM– DX(E) Infant Radiant Warmer allow you to efficiently care and provide advance warming capabilities while using one touch operations to simplify procedures. Advance microprocessor controlled system with self-check on the electronic circuitry skin /air/ manual control.